New Mid-Size PET Preform Machine
Nissei ASB will debut at K 2022 a 100-ton vertical rotary press for PET preforms in 18 to 36 cavities.
New Nissei ASB PM-100/111N machine uses a vertical press and three-station rotary table to mold PET preforms in a very compact footprint. (Photo: Nissei ASB)
K 2022 marks the global debut of Nissei ASB’s brand-new PM-100 machine for injection molding PET preforms in 18, 24 or 36 cavities. This 100-metric-ton press fits between the company’s existing models with 70-m.t. clamp for eight to 24 cavities and 170 m.t. for 48 cavities. At the show, a model PM-100/111N will mold 13.5-g preforms with 28-mm “Alaska neck” for water bottles in 36 cavities at 14,700 bph.
Eject station of PM-100/111N shows rotary table with 36 cavities. (Photo: Nissei ASB)
This machine uses a vertical clamp and three-station rotary table. A complete set of lip cavities at each station permits handling preforms by the neck at every step. Preforms are molded in three rows and are cooled on both inner and outer surfaces. At the eject station, further cooling can occur before ejection from the lip cavities. Two injection screw diameters and two clamp daylight options are available. Footprint is only 13 m2.
Related Content
-
How to Get Rid of Bubbles in Injection Molding
First find out if they are the result of trapped gas or a vacuum void. Then follow these steps to get rid of them.
-
How to Stop Flash
Flashing of a part can occur for several reasons—from variations in the process or material to tooling trouble.
-
How to Set Barrel Zone Temps in Injection Molding
Start by picking a target melt temperature, and double-check data sheets for the resin supplier’s recommendations. Now for the rest...
