Correction on Purging
In our September issue, we incorrectly stated (p. 17) that Asaclean U high-performance purging agent is not suitable for polypropylene.
In our September issue, we incorrectly stated (p. 17) that Asaclean U
high-performance purging agent is not suitable for polypropylene. It
is suitable for most resins, including PP. However, the supplier, Sun
Plastech, Inc., Parsippany, N.J., does have another grade, Asaclean
UP, recommended specifically for PP, due to its greater compatibility.
Related Content
-
Understanding the ‘Science’ of Color
And as with all sciences, there are fundamentals that must be considered to do color right. Here’s a helpful start.
-
Resin Prices Still Dropping
This downward trajectory is expected to continue, primarily due to slowed demand, lower feedstock costs and adequate-to-ample supplies.
-
Melt Flow Rate Testing–Part 1
Though often criticized, MFR is a very good gauge of the relative average molecular weight of the polymer. Since molecular weight (MW) is the driving force behind performance in polymers, it turns out to be a very useful number.