Melt Temperature Measurement Technology Acquired
MTMS has acquired all the rights for the patented plastic melt temperature measurement system for injection molding from Schmit Prototypes.
Newly formed MTMS LLC, Janesville, Wisconsin, has acquired the melt temperature measurement technology developed and patented by Richard Bleck from on-demand parts and prototype manufacturer Schmit Prototypes, Menomonie, Wisconsin. Bleck has more than 50 years of experience in injection molding, including 38 years at Phillips Medisize and the former Phillips Plastics. Bleck applied that experience to solve what has always been a nettlesome problem for molders, determining the true temperature of the plastic melt.
In 2020, Bleck’s company, Procon Training and Consulting LLC, Phillips, Wisconsin, was awarded a patent for his solution which utilizes an insulated purge cup to keep the purge molten and then measure its temperature with a thermocouple positioned in the flow path.
After developing and patenting the melt temperature measurement kit, Bleck worked with Schmit Prototypes to produce some of the components for the kit, before eventually partnering with them to manage the sales of the technology.
MTMS says that Schmit’s expertise in precision manufacturing will continue to be utilized moving forward, as will the expertise of Bleck. “MTMS saw how the plastic melt temperature measurement system is far superior to current methodologies, so it was a no-brainer becoming a part of this technology and to advance the utilization of this technology into the injection molding industry,” says Nick LaBansky, MTMS president.
MTMS has acquired the rights to the melt temperature measurement system from Schmit Prototypes. Photo Credit: MTMS
Related Content
-
Know Your Options in Injection Machine Nozzles
Improvements in nozzle design in recent years overcome some of the limitations of previous filter, mixing, and shut-off nozzles.
-
How to Get Rid of Bubbles in Injection Molding
First find out if they are the result of trapped gas or a vacuum void. Then follow these steps to get rid of them.
-
How to Reduce Sinks in Injection Molding
Modifications to the common core pin can be a simple solution, but don’t expect all resins to behave the same. Gas assist is also worth a try.