Fakuma 2023: Oerlikon HRSflow Showcases Sustainability-Focused Technologies
Packaging and automotive applications highlighted via stack mold, hot runner nozzle and valve-gate technologies.
Oerlikon HRSflow (booth 1216, hall A1) will display it’s previously introduced stack mold technology for efficient molding of thin-walled, ecologically optimized packaging. Patent-pending and available soon, the system features the new Xd series nozzles, enabling high filling pressures. The stack-mold design allows a lower tonnage press to be used and Oerlikon HRSflow says they system is suited for processing PCR plastics and sustainable compounds.
In addition, Oerlikon HRSflow will show a 72-cavity cap molding system utilizing its Vf nozzle series, which reportedly enables cycle times of 2.2 to 3.5 seconds and balanced fill. The design satisfies new Europes single-use plastic directive, which mandates tethered closures for all beverage containers up to three liters in volume.
Specially developed for HDPE caps and closures, the Vf nozzles can fill part weights from 0.5g to 8g. The design features a special nozzle tip that enables optimum control in the gate area while improving cycle time. Replaceable nozzle tips ease maintenance, and Oerlikon HRSflow says the hot runner geometries have been rheologically optimized. In addition, special inserts minimize color-change times.
FLEXflow technology will also be presented at Fakuma 2023. The servo-driven valve gate system is combined with a programmable control, allowing independent adjustment of the stroke and force of the needle position of each individual nozzle during the opening and closing phases for cascading injection processes.
Oerlikon HRSflow will put sustainability in focus at Fakuma 2023.
Photo Credit: Oerlikon HRSflow
Related Content
-
How to Optimize Pack & Hold Times for Hot-Runner & Valve-Gated Molds
Applying a scientific method to what is typically a trial-and-error process. Part 2 of 2.
-
Where and How to Vent Injection Molds: Part 3
Questioning several “rules of thumb” about venting injection molds.
-
How to Start a Hot-Runner Mold That Has No Tip Insulators
Here's a method to assist with efficient dark-to-light color changes on hot-runner systems that are hot-tipped.