Exploring the: Micro Molding Zone
11 Results for: New ProductSort by:
DRYING: Compressed-Air Micro Dryers
Said to be suited for smaller extrusion, micro molding, and AM applications.
INJECTION MOLDING: New Hybrid Micromolding Machine With Servohydraulic Clamp
Dial down the tonnage as low as 5%, or 1.5 tons.
INJECTION MOLDING: Energy-Saving Presses and Medical Systems Debut at Fakuma
Larger models complete servohydraulic series; presses get cleanroom qualification.
INJECTION MOLDING: Micromolding Machine Gets Even Smaller
Direct gating of up to 12 micro parts per cycle.
INJECTION MOLDING: Sneak Peek at Fakuma News
News in LSR, micromolding, IML, medical technology, and more.
INJECTION MOLDING: Six Wittmann Molding Cells And New Robots in Orlando
From micromolding to 650-ton presses will be operating with robots, IML, LSR, Varioutherm, foam, and two-shot molding.
INJECTION MOLDING: New Micromolder & Expandable Bead Integrated with Molding
whole machine is inside a cleanroom enclosure.
Modular Micro-Injection Unit
The German parent of Arburg, Inc., Newington, Conn., has come out with a new micro-injection module that can be mounted on a standard machine base and also can be removed quickly to allow the press to be returned to conventional molding.
More Micromolding Presses
Few details are currently available, but a 5-ton micromolding press for molding parts weighing under 0.1 g will be revised with two new injection units and clamp capacities.
'Hybrid' Press Line Expands
New and updated injection machines from Nissei Plastic Industrial Co.