Exploring the: Mold Maintenance Zone



« Prev | | Next »

Sort by:


TOOLING: New Mold Base Sizes, Mold Cleaners, Rust Preventatives
Larger frame sizes, and spray-on mold-maintenance chemicals.
New Product Announcements Published: 7/21/2014
TOOLING: Expanded Training in Hot-Runner Maintenance/Repair
Training course is doubled in length.
New Product Announcements Published: 7/21/2014
TOOLING: Flexible Dry-Ice Mold Cleaner
Cold Jet, Loveland, Ohio, introduced the latest model in its SDI series of dry-ice mold-cleaning machines at NPE2012.
New Product Announcements Published: 4/29/2012
TOOLING: Mold-Maintenance Chemicals Free of Chlorinated Solvents
Slide Products, Wheeling, Ill., has eliminated chlorinated solvents from its entire line of mold releases, mold cleaners, lubricants, rust preventives, and purging compounds, helping molders to provide safer work environment and lowering their costs...
New Product Announcements Published: 2/1/2012
Ruse Preventive Won't Mark Molded Parts
A new rust preventive from Slide Products, Wheeling, Ill., delivers a dry mist that does not penetrate into moving mold components like ejector pins holes, slides, and cams.
New Product Announcements Published: 4/1/2010
Store All Your Mold Data Right on the Mold
WEB EXCLUSIVE: RedE Vault is a USB flash drive with a “virtually indestructible” and a screw fastener to allow it to be attached to a mold base.
New Product Announcements Published: 2/1/2010
Mold Maintenance Training Center Opens in Ohio
One of the industry’s “best kept secrets” was the opening in March of the ToolingDocs Maintenance Center in Ashland, Ohio, says Steve Johnson, operations manager.
New Product Announcements Published: 8/1/2009
New Dry-Ice Blaster Cleans Molds Faster, Easier and at Lower Cost
A new generation of dry-ice blasting machines is said to provide non-abrasive mold cleaning more cost-effectively than ever before and with greater speed, reliability, and ease of use.
New Product Announcements Published: 5/1/2008
Lubricant for LSR Molds
A new high-temperature lubricant for liquid silicone rubber or other thermoset molds, and a new solvent for cleaning between lubrication cycles, come from Alba Enterprises Inc., Rancho Cucamonga, Calif.
New Product Announcements Published: 12/1/2007
Clean Molds with 'Green' Rust Remover
A water-based, biodegradable rust remover for molds and dies is new from Amazing One, Howell, Mich.
New Product Announcements Published: 11/1/2007

« Prev | | Next »


PTOnline
All rights reserved. Copyright © Gardner Business Media, Inc. 2014 Cincinnati, Ohio 45244