We love Powders! NPE
Published

“Maybe BPA isn't so bad after all”

That’s how Jon Hamilton, a reporter at National Public Radio’s (NPR) science desk, began his story this week on a new report by government scientists published in the journal Toxicological Sciences, which concludes what many reports on bisphenol A (BPA) already have.

Share

 

“The plastic additive has been vilified by environmental advocacy groups. But the chemical had no effect on rats fed thousands of times the amount a typical person ingests, government scientists are reporting in the journal Toxicological Sciences.

The results "both support and extend the conclusion from the U.S. Food and Drug Administration that BPA is safe as currently used," says Daniel Doerge, a research chemist with the FDA's National Center for Toxicological Research.
 

At the MD&M West show in Anaheim earlier this month, and before this latest revelation, I spoke with two of the largest producers of polycarbonate (PC) resins in the world—Bayer MaterialScience and SABIC—about BPA backlash and its knock-on effect on PC, an engineering resin that’s made from a mix of chemicals including BPA. That backlash has led some companies to move away from PC in a variety of markets, including human-contact applications in consumer goods and healthcare, for example.
 

Bruce Fine, market segment leader, medical and consumer products at Bayer, told me that the FDA continues to assert BPA is safe for the applications and uses it's approved for “despite all the other discussions,” he noted, adding that the agency is also working on a round test, a studies of studies, to further validate the chemical’s safety.


"[BPA fears] are not supported by sound science,” Fine said. “If they were, we would address it accordingly." I asked about an application like baby bottles, which experienced a de facto ban as retailers and brands announced a wholesale shift away from PC, but Fine said that to his knowledge, no domestic producer of the resin had sold PC into the baby bottle market in “years”, calling the “BPA-free” push in that area a "nonevent" for Bayer.


Fine did say Bayer had experienced some cases where OEMs had made the switch away from PC, but it had also seen instances where those same customers switched back.


When asked whether her company is still queried on BPA, Cathleen Hess, SABIC’s Director of Healthcare Marketing at SABIC, was succinct. “Of course [BPA] comes up,” Hess said. “All we’re doing is studying the science, which says it’s safe, so we continue to promote PC in the healthcare industry.”


Maybe this latest study will make those discussions easier for companies like Bayer and SABIC, but maybe not. Perusing the comments below the NPR story, a healthy amount of skepticism about BPA’s safety remained (see below).
 

Well if the government says so, it must be true. Certainly, they would never allow themselves to be corrupted by the chemical companies that produce BPA. I think I will continue to err on the side of [sic] cautious and avoid exposure to questionable synthetic chemicals that provide no real value to my existence.


In a “background information” piece Bayer distributed at the show entitled “Government funded research supports the safety of bisphenol A”, Bayer noted that the chemical has been subjected to more than 5000 studies that have in turn been reviewed by health and regulatory authorities all over the world. “The newest research results continue to build on the body of evidence indicating the safety of BPA,” the release stated.


Well, we can add another study to that list, but will it be enough to change public perceptions about BPA and PC? That ship might have sailed.

Windmoeller
New Tinius Olsen VectorExtensometer testing
New 2024 Twin Screw Report
TracerVM Flow Meter features many display options
Bole Machinery
Vacuum Tech for Plastics Manufacturers
Plastics Recycling Latam
LKIMM
Registration is on Us
Dover Clear
Gardner Business Media, Inc.
AM Workshop

Related Content

Medical Manufacturer Innovates with Additive Manufacturing and Extrusion Technology Hubs

Spectrum Plastics Group offers customers two technology hubs — one for extrusion, the other for additive manufacturing — to help bring ground-breaking products to market faster.

Read More

Medical Molder, Moldmaker Embraces Continuous Improvement

True to the adjective in its name, Dynamic Group has been characterized by constant change, activity and progress over its nearly five decades as a medical molder and moldmaker.

Read More
Blow Molding

New Cap for Child-Resistant Pill Bottles Is Senior-Friendly & Saves Resin

Exclusive lightweight cap design can be removed simply pushing down on the center. No gripping or twisting needed.

Read More
Recycling

Collaboration will bring Recycled Plastic to Medical Device Packaging

Agreement between Eastman and Ethicon will put copolyester derived from recycled materials in sterile barrier applications.

Read More

Read Next

Extrusion

Troubleshooting Screw and Barrel Wear in Extrusion

Extruder screws and barrels will wear over time. If you are seeing a  reduction in specific rate and higher discharge temperatures, wear is the likely culprit.   

Read More
sustainability

Lead the Conversation, Change the Conversation

Coverage of single-use plastics can be both misleading and demoralizing. Here are 10 tips for changing the perception of the plastics industry at your company and in your community.

Read More
close up on technology

Processor Turns to AI to Help Keep Machines Humming

At captive processor McConkey, a new generation of artificial intelligence models, highlighted by ChatGPT, is helping it wade through the shortage of skilled labor and keep its production lines churning out good parts.

Read More
Shell Polymers (Real)ationships start here ad.