At NPE: Precise Valve-Gate Programming
Electric drive programs valve-pin movements.
Heitec hot runners are featured in the booth (W483) of Technoject Machinery Corp., Bolton, Ont. (U.S. office in Chicago). A highlight of the booth is a two-drop valve-gate system driven by a Visio-NV-Drive system, which can delay opening time by adjustable increments of 0.01 sec and can set end positions in increments of 0.01 mm. The valve pins are controlled by an electric Visio Linear Drive.
Related Content
-
Why Shoulder Bolts Are Too Important to Ignore (Part 2)
Follow these tips and tricks for a better design.
-
What You Need to Know About Leader Pins and Bushings
There’s a lot more to these humble but essential mold components than you might suspect. Following the author’s tips could save much time, money and frustration.
-
Back to Basics on Mold Venting (Part 1)
Here’s what you need to know to improve the quality of your parts and to protect your molds.
