Exploring the: Drying Zone



« Prev | | Next »

Sort by:


How to Keep Moisture Away From Your APET Sheet Line
Moisture in PET will result in degradation that will foul up sheet and thermoformed products. Keep it at bay by following these tips when drying APET virgin and flake material.
Article Published: 7/16/2015
Auxiliaries AT NPE: New Controls Link Auxiliaries
Industry 4.0—the internet of things—is bringing a new level of connectivity to auxiliary equipment. Here’s a rundown of developments there, along with other news in auxiliaries from the show.
Article Published: 7/1/2015
Moretto Considers North American Assembly of Eureka Drying Technology
The Italian company's largest Eureka drying system is currently installed at an undisclosed North American customer.
Article Published: 3/24/2015
PPA Adds Four to Membership Roster
Group also names Gail Bristol new president.
Article Published: 3/10/2015
AUXILIARIES AT NPE: More Control, Flexibility, And Energy Efficiency
These are key trends in the many kinds of auxiliary equipment displayed at this month’s show. You’ll also see equipment designed to be virtually ‘foolproof.’
Article Published: 2/24/2015
Short-Run Specialist Chases Higher Productivity While Staying Lean
How do you automate jobs that run only a few hours? That’s only one of the questions challenging a fast-growing, short-run molder.
Article Published: 2/19/2015
Detect When Equipment Needs Maintenance—Before It’s Too Late
New technology to debut next month at NPE warns when preventive maintenance is needed, before equipment failure disrupts production.
Article Published: 1/30/2015
How to Dry PET for Container Applications
PET is extremely hygroscopic, highly moisture sensitive, and one of the toughest challenges to dry. Here are the basic principles of doing it right for rigid packaging applications
Article Published: 11/24/2014
B&B Molders Sticks to Its Core— Core Values & Core Competencies
To compete in today’s market, you need good technology, but you also need to know what you stand for and what you’re good at.
Article Published: 8/26/2014
Plastics Technology's Drying Supplement
Learn from the experts, including savvy processors, on how to get drying done right.
Article Published: 5/9/2014

« Prev | | Next »


All rights reserved. Copyright © Gardner Business Media, Inc. 2015 Cincinnati, Ohio 45244