Schenck AccuRate
Contact Information
Please visit: Schenck AccuRate
Mailing Address:
746 E Milwaukee St.
Whitewater,
WI
53190
US
Phone:
262-473-2441
Toll-Free:
800-558-0184
Fax:
262-473-4384
A Special Message from Schenck AccuRate
Bulk Solids Metering Solutions For Plastics Manufacturers
|
Designed specifically for extruder manufacturers and compounders, the ProFlex® C is excellent for metering resins, colors, fillers, impact modifiers, and UV inhibitors. The ability to exchange motor assemblies and material discharge positions accommodate different clustering requirements for up to eight feeders. |
|
|
|
|
For feeding resins, fillers and a variety of other additives including wood flour and fumed silica, Schenck AccuRate's MECHATRON® feeder offers complete disassembly from the non-process side. This allows for easy cleaning and quick auger diameter changes necessary for process changeovers. |
|
|
|
|
Multicor® Mass Flow Meters offer the ability to continuously weigh, batch, and gravimetrically feed dry, free-flowing materials. Multicor® is ideal for applications involving feed rates from ½ ton to over 200 metric tons per hour. |
Product Categories of Schenck AccuRate
- Closed-loop Process Control Systems
- Feeders
- Metering, Proportioning Equipment
- Sequence Logic Controls
- Weigh Scales
Deep Links
- AccuRate® Solves a Material Handling Problem for Polyone Corporation - In an effort to automate their manufacturing process, PolyOne Corporation, a plastic materials manufacturer, sought a solution to eliminate the manual handling of ingredients. The ability to automate their plant would require the assistance of a feeding equipment supplier. PolyOne chose AccuRate®, a leader in bulk material handling products for over 40 years, to provide the loss in weight screw feeders and control systems needed to solve their ingredient feeding problem.
As seen in PT
-
Versatile Feeder For Compounders, Extruders
Maximum versatility, small footprint.
-
AUXILIARIES: Versatile Dry-Material Feeders
The newest Mechatron dry material feeders from Schenk AccuRate, Whitewater, Wis., offer complete disassembly from the non-process side of the feeder, which eliminates the need to remove upper extension hoppers, bins, bulk bags, and IBCs to clean or maintain the unit.
-
Materials Handling: New Equipment Emphasizes Efficiency & Value
Visitors to the recent NPE 2009 show in Chicago were looking for materials handling equipment that could do more than dry, blend, or convey resins. It had to do those things while saving energy, providing faster and easier maintenance, speeding product changeovers, reducing labor cost, minimizing waste, and providing better value for money. The new products cited below addressed those needs and more.
-
Low-Rate Feeder Has Disposable EPDM Hopper
New PureFeed AI-300 feeder from Schenck AccuRate, Whitewater, Wis., is designed for metering additives at rates as low as 1.1 lb/hr, though larger feed augers are available for up to 330 lb/hr.
-
Designed specifically for extruder manufacturers and compounders, the new ProFlex® C 500 feeder packs maximum versatility into a very space and cost efficient package that?s easy to operate, reconfigure, clean, and service.
-
Flexible Weigh Feeder For Extrusion, Compounding
Designed for flexibility in mounting and clustering, the new ProFlex C feeder permits interchanging the drive-motor and material-discharge positions.
-
Feeders Go Wireless
Volumetric and gravimetric feeders from Schenck AccuRate, Whitewater, Wis., now can have optional Bluetooth wireless technology.
-
Touchscreen Feeder Control
A single-feeder operator interface with lighted touchscreen LCD display is new from Schenck AccuRate, Whitewater, Wis.
-
NPE 2006 News Wrap-Up: Materials Handling: A Host of Refinements and Updates
NPE 2006 held no revolutionary changes in dryers, blenders, feeders, loaders, or conveying controls, but widely adopted improvements make the newest models easier to use and maintain—and easier on the budget, too.
-
What to See at NPE 2006: Materials and Parts Handling
Dryers, feeders, blenders, loaders, metal detectors, level sensors, mechanical and pneumatic conveyors, silos, bins, pumps, filters, valves, box fillers, bag dumpers, and materials-handling control systems constitute one of the biggest categories of products on display at NPE.
-
NPE Newsfinder: Materials & Parts Handling
From pneumatic systems that deliver materials to the processing machine to conveyors and handling devices that pull parts out the back, the trend appears to be “smaller and smarter.” NPE 2000 will show lots of downsized auxiliaries designed for mini processing machines, as well as more compact equipment of every size that frees up floor space.
