Please visit: Brabender Technologie Inc.
6500 Kestrel Rd.
Mississauga, ON L5T 1Z6 CA
These are key trends in the many kinds of auxiliary equipment displayed at this month’s show. You’ll also see equipment designed to be virtually ‘foolproof.’
A new vibratory gravimetric metering feeder was introduced at the recent K 2007 show by Brabender Technologie (North American office in Mississauga, Ont.). Its DualTray Feeder consists of two or more cylindrical feed modules, each with a semicircular feed tray across half its cross-section.
The new Congrav OP5 touchscreen operator interface from Brabender Technologie Inc., Mississauga, Ont., can monitor and control up to 16 weigh feeders.
NPE 2006 held no revolutionary changes in dryers, blenders, feeders, loaders, or conveying controls, but widely adopted improvements make the newest models easier to use and maintain—and easier on the budget, too.
Liquid Loss in Weight Feeders Standard modules for • Weigh tank • suction line • pump support Positive displacement pumps supplied based on customer • Recommended manufacturer • Process requirements Controls integreated with dry feeder controls • % of total extruder throughput • master / slave Feed rate at high accuracy • 0.1% to 0.5% of feed rate Economical Price Optional Liquid feed systems supplied with Coriolis Mass flowmeters.
Brabender Technologie Inc. introduces Ultra Low Rate Feeders, Loss In-Weight, for powders, granules and pellets.
Brabender Technologie NEW ScrewDisc Feeder For optimum performance in feeding pellets and free flowing granules, the Brabender ScrewDisc Loss-in-Weight feeder offers a Pulsationless flow over a wide feed rate range.
Coriolis Mass Flowmeter for Pellets/Powders This meter provides the mass flow rate signal feedback to control the speed of an upstream screw or rotary feeder.
NEW – Brabender Pharmaceutical FlexWall Screw Feeder Brabender's Pharmaceutical FlexWall Screw Feeder.
Brabender Technologie Inc. demonstrates the NEW “Easy Change” hopper design for the FlexWall Plus feeder.
The big show in Chicago presented more new loaders, feeders, blenders, and conveying controls than you could count. They’re more flexible, easier to maintain, and easier to control. Many are web-enabled, and some are lower in cost.