Interactive Training for Injection, Extrusion and Other Processes
Paulson has four in-booth stations demonstrating its various training solutions.
On each day of NPE2024, Paulson Training Programs has four in-booth stations equipped with interactive visual displays and opportunities to view sample courseware like its newly enhanced Technology of Injection Molding series of online courses that include interactive guided and discovery labs built in as well as other titles, including Injection Molding Fundamentals, Injection Molding Part Problems and Solutions. There are also opportunities to interact with and use Paulson’s powerful and advanced SimTech injection molding simulation technology!
Additionally, there are live demos in extrusion technology with Paulson’s Extruder Operation and Control: Single Screw; Compounding with the Twin Screw Extruder; and Sheet Extrusion Technology, as well as courseware demonstrations in Thermoforming and injection stretch blow molding of PET.
Related Content
-
Understanding Melting in Single-Screw Extruders
You can better visualize the melting process by “flipping” the observation point so that the barrel appears to be turning clockwise around a stationary screw.
-
Formulating LLDPE/LDPE Blends For Abuse–Resistant Blown Film
A new study shows how the type and amount of LDPE in blends with LLDPE affect the processing and strength/toughness properties of blown film. Data are shown for both LDPE-rich and LLDPE-rich blends.
-
Why Compression Ratio is Important
Compression ratios have been pretty much standardized over the years, based on what has typically worked before. But there are quite a few variables that must be considered in order to get the optimum performance from your screw.
