Purging Compounds
Commodity Resin Prices Rising
Prices of PP and PS moved up in December and were poised to move up again last month. Price hikes also were on the table for PVC and PE.
Read MoreFrequently Asked Questions About Purging
This 'FAQ' sections answers common questions about how to choose and use purging agents.
Read MoreNot Your Father’s Purging Agent
There are two important messages for today’s processors with regard to purging. First, as we near the peak of the “rapid improvement” stage of purging technology, the products now available are not the same old purging compounds of the past. Second, the “low-hanging fruit” has been picked—future technical improvements will likely be incremental and future improvements in productivity will require a shift in focus, toward transition planning and process optimization.
Read MorePurging High-Performance Engineering Resins
One of the fastest growing markets for commercial purging compounds is purging high-performance engineering resins. It is also one of the most difficult challenges, since both mechanical and chemical purging compounds have limitations when it comes to heat stability, residence time, flow restrictions, etc.
Read MoreMATERIALS AT NPE: All Market Sectors Benefit from Large Crop of New Materials
Higher-performance and easier processing PE film resins for packaging, a one-pass crosslinked PE for photovoltaic (PV) wire and cable, several higher-performing nylons and TPEs, “greener” plastics, and enhanced styrenic and PC resins are among the new materials that made their debut at the big show in Orlando, Fla., last month.
Read MoreWEB EXCLUSIVE: Ultra Purge Starts Production in Brazil
Expansion will allow company to provide better customer service to the Latin American market.
Read MoreMaterials & Additives at NPE: Performance, Processability, And Sustainability
Bioplastics take center stage.
Read MoreHow to Use Commercial Purging Compounds in Extrusion
CPCs are considered most often for injection molding. However, they also can provide the same benefits to extrusion processors.
Read MorePay Attention to Your Nozzle Body & Tip
These are overlooked components that can cost you thousands.
Read MoreTips and Techniques: Break the Taboo On Purging Hot Runners!
It’s safe to say that the concept of using a commercial purging compound (CPC) has largely been embraced by the plastics processing community.
Read More