New 2024 Twin Screw Report
Published

Single-Wall Carbon Nanotubes Show No Ecotoxicity

Findings on OCSiAl’s Tuball nanotubes are based on OECD chemical testing guideline 201.

Share

The Tuball single-wall carbon nanotubes produced by Russia’s OCSiAL (U.S. office in Columbus, Ohio) were recently tested for their ecotoxicity potential in accordance with the relevant OECD chemical testing guideline 201, and were shown to have no toxic effects on algae. This in contrast to a set of recent results with muti-wall carbon nanotubes. Among the possible reasons, says OCSiAL, is their unique physical nature, particularly their high flexibility.

The range of applications of carbon nanotubes has continued to increase rapidly and now extends far beyond only high-technology products to include consumer goods. As a result, concerns have been raised about the potential adverse environmental effects of carbon nanotubes.  A single-wall carbon nanotube is a one-atom-thick sheet of graphene that is rolled into a tube. This type of nanotube has been shown to possess a number of important properties, including high flexibility that is far superior to that offered by multi-wall carbon nanotubes or carbon fibers.    

Independent European research laboratory Envigo, which conducted the studies, examined the Tuball single-wall carbon nanotubes by treating algae—recognized as a very sensitive species—with a  saturated solution of the nanotubes for 72 hours, as per the OECD guideline. The measured algal biomass densities and thus the growth rates demonstrated that there were no toxic effects. Said researcher Detlef Schuler in his soon-to-be published article, “There is no indication that dissolved Tuball single-wall carbon nanotubes have any intrinsic ecotoxic properties at all when tested in solution as stipulated by the testing guidelines. Furthermore, unlike multi-wall carbon nanotubes and carbon fibers, single-wall carbon nanotubes are highly flexible and may thus generally have a lower potential to harm the cell walls of algae.”

Fundamentally, distinctive features of single-wall carbon nanotubes, compared with the multi-wall nanotubes and carbon fibers, have historically been underestimated by researchers. A number of recent test results have illuminated various effects of these nanomaterials interacting with the environment. One example is a study led by the Russian Far Eastern Federal University that demonstrated both acute and chronic toxic effects of multi-wall carbon nanotubes on marine algae. The researchers concluded that mechanical damage to the cell walls was the reason for this effect, and that this was due to the rigid nature of this type of nanotube.

Further specific and comprehensive studies on single-wall carbon nanotubes’ potential toxic properties will be conducted in the very near future, including inhalation toxicity studies to be carried out according to the relevant OECD test guidelines. Tests on migration of these nanotubes from a material’s matrix, and case studies in the workplace to measure the exposure to inhaled nanoparticles and the environmental risk for workers are already in the public domain, according to OCSiAL.

It should be noted that the single-wall carbon nanotubes continue to be more expensive than their multi-wall counterparts—although all have come down in price as commercial applications grow. According to OCSiAL, the multi-wall nanotubes are about nine times higher in cost. However, depending on the application, the multi-wall carbon nanotubes require dosage levels between 20 and 100 times higher than their single-wall counterparts—generally making the latter more cost-effective. 

Earlier this year, we reported on how OCSiAl’s Tuball nanotubes were used in the first anti-static blown PE films.

Maguire Ultra
Realationships
New 2024 Twin Screw Report
Blending Revolution
mold, mould track, digital tracking, molding
NPE2024: The Plastics Show
Vecoplan
Windmoeller
RoyAlloy Stainless Mold Base Steel
Insert molding automation

Related Content

Medical Molder, Moldmaker Embraces Continuous Improvement

True to the adjective in its name, Dynamic Group has been characterized by constant change, activity and progress over its nearly five decades as a medical molder and moldmaker.

Read More
Packaging

In Sustainable Packaging, the Word is ‘Monomaterial’

In both flexible and rigid packaging, the trend is to replace multimaterial laminates, coextrusions and “composites” with single-material structures, usually based on PE or PP. Nonpackaging applications are following suit.

Read More
Packaging

Solve Four Common Problems in PET Stretch-Blow Molding

Here’s a quick guide to fixing four nettlesome problems in processing PET bottles.

Read More
Biopolymers

How to Optimize Injection Molding of PHA and PHA/PLA Blends

Here are processing guidelines aimed at both getting the PHA resin into the process without degrading it, and reducing residence time at melt temperatures.

Read More

Read Next

Injection Molding

Processor Turns to AI to Help Keep Machines Humming

At captive processor McConkey, a new generation of artificial intelligence models, highlighted by ChatGPT, is helping it wade through the shortage of skilled labor and keep its production lines churning out good parts.

Read More
sustainability

Lead the Conversation, Change the Conversation

Coverage of single-use plastics can be both misleading and demoralizing. Here are 10 tips for changing the perception of the plastics industry at your company and in your community.

Read More
Extrusion Know How

Troubleshooting Screw and Barrel Wear in Extrusion

Extruder screws and barrels will wear over time. If you are seeing a  reduction in specific rate and higher discharge temperatures, wear is the likely culprit.   

Read More