• PT Youtube
  • PT Facebook
  • PT Linkedin
  • PT Twitter
3/19/2014 | 3 MINUTE READ

Are Imported PET Preforms Likely To Hit Our Shores?

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

At least one expert in the global polyester industry thinks that may well be a possibility, despite some odds against it. Speaking at Plastics Recycling 2014 conference held last week in Orlando, this scenario was part of his overall presentation and panel discussion, which offered a detailed assessment of PET resin market price trends and what the immediate future may hold.


John Maddox has a 34-year history in PET, from resin producer and container manufacturer to his Jacksonville, Fla., consultancy  SBA-CCI for which he is president. The company produces a unique macroeconomic supply/demand, precise /margin model on the global value chain and offers consulting to the global polyester industry and upstream feedstocks (PX, PTA/DMT, fibers, PET resin and film). Here’s how he characterizes the current state of the domestic PET resin with a focus on preforms and why imported preforms could pose a further dilemma.


Maddox says, there is excess PET resin, excess preform capacity for most generic sizes—like CSD (carbonated soft drinks) and water, as well as excess blow molding capacity at container suppliers like Amcor, Graham, Plastipak and Berry, and self-manufacturers like Coke and Pepsi. “In other words—related specifically to PET preforms—even those who self-manufacture their own preforms and bottles have been trying to sell-off excess capacity to merchant container suppliers.” He further points to those companies who are solely in the preform manufacturing business, noting that they are “regularly squeezed from all sides”.


Idle preform injection molding capacity creates real problems including excess people, layoffs, and higher overhead per unit. And perhaps as important—lack of PET resin purchased, says Maddox.  This creates problems for the purchasing department who does not meet their purchasing commitments and this runs the risk of not getting the best price discounts. So everyone tries really hard to keep preform injection going—even, if it means “dumping-off” preforms at or near cost. Now, he sees this as the biggest hurdle for imported preforms—that they are widely available at  low cost domestically.


However, Maddox points out that excess domestic capacity has not kept PET resin imports from growing, and in fact has continued since the 2005 production disruptions that resulted from the disastrous Hurricane Katrina.  It can still be imported—especially to the West Coast, cheaper than domestic production being shipped to the West Coast because railcar freight west of the Rockies is at a high premium. The success of these continued PET imports lies in both their cheaper prices, adequate quality, and supply lines that were not that long.


So, will preforms start being imported too?  Maddox says, his company has received emails from several companies, mostly from China or India, who think they can sell preforms in the USA. “We know for sure that Gatronova of Pakistan has world-class injection equipment and supplies preforms broadly within Pakistan.  Maddox reminds us that preforms (less than 1 liter) have a bulk density similar to PET pellets, so that shipping cube is economical. He adds that there are always such issues as questions about quality, consistency, shipment delays and shipping damages, but notes that in PET resin, those same objections have been overcome.


Maddox believes that we would be naïve to think that imported preforms may not be something to contend with in near future. His justification includes the fact that excess PET capacity is also taking place in Asia and that PET resin is significantly cheaper there. Moreover, preform freight is about the same as resin freight—same weight per sea container, and they also have world-class preform manufacturing technology in place. “Damage to preforms will be the pushback, but that has proven to be a non-issue with proper handling and packing. Hundreds of millions of preforms had been shipped from the USA to Europe, the Caribbean and South America for several years before those regions installed their own capacity. So, if they can go out with no quality problems, they can also come in with no quality problems.”



Related Topics