W. Müller USA
1163 Suffield St.
Agawam , MA 01001 US
As Seen In Plastics Technology
Screen Changers for Extrusion Blow Molders
W. Muller is offering its own line of screen changers for vertical or horizontal blow molding extruders, suitable for retrofit.
Blow Molding: Something for Everyone at K Show
Packaging, industrial, continuous-extrusion, accumulator-head, injection-blow, stretch-blow, EPET, foam, sandwich co-injection—the blow molding news was wide ranging at K 2019.
NPE Wrap-Up: News in Primary Machinery, Part 1
Rounding up details from the Big Show not previously reported in all our other coverage, here’s more news in injection and blow molding, extrusion and compounding. Next month, we’ll conclude with recycling/scrap reclaim, robots, tooling, auxiliary equipment, materials and additives.
News Highlights from NPE2018
Developments in Industry 4.0, multi-layer preform molding, automation, LSR processing, and PP were among the major newsbreakers at May’s show. And one film processor finalized purchases of 13 new lines.
NPE2018 New Technology Focus: Foam Fascination
A new physical foaming process and a significant enhancement of the MuCell process attract attention at the show.
Blow Molding at NPE2018: Blow Molding Systems Run the Full Spectrum at NPE
Machines for every process—shuttle, wheel, reciprocating-screw, accumulator-head, suction-blow, injection-blow, compression blow, and one- or two-stage stretch-blow molding—will be running in Orlando. There will be a host of new models, including electric and servo-hydraulic types.
Foam Blow Molding Advances to Commercial Use
W. Muller’s three-layer coextrusion head, with nitrogen gas injected in the center layer, has found its first commercial application in large agro-chemical containers.
Blow Molding: New Machines Take on Challenging Shapes
￼From very small to very large, from hotel amenity bottles to automotive jounce bumpers, new and upgraded machines tackle difficult jobs while improving productivity, quality, and energy efficiency.
Here's Another Process for Foam Blow Molding
After two years of behind-the-scenes development, a new process for lightweight bottles emerges into the open.
Foam Blow Molding Process Unveiled at NPE
What's different is direct gas injection into the head, not the barrel.
BLOW MOLDING AT NPE: New Packaging & Industrial Machines
Several new wheels, a reciprocating-screw system for industrial parts, and a host of new PET machines debuted in Orlando.
How Currier Puts the ‘Custom’ In Custom Blow Molding
The three key ingredients are responsiveness, full-service product development, and control over both the bottle and the cap.
Two New Blow Molding Tech Centers
Uniloy offers a range of new and expanded services for extrusion blow and injection-blow molders.
Blow Molding News at K 2013
All-electric machines of all types were the stars of the show, but there were a number of other noteworthy developments.
News in Materials & Machinery at SPE Blow Molding Conference
New barrier materials for small fuel tanks, tooling developments for large, flat, and odd-shaped industrial parts, new all-electric machines for large containers, and gravimetric extrusion control for bottles are some of the topics discussed at the recent SPE Blow Molding Div. annual conference in Pittsburgh.
Blow Molding at NPE: Speed, Quality & Flexibility Take Center Stage
Wheel machines in particular will be on display.
K 2010 Preview, Blow Molding New Machines Promise More Output with Less ‘Juice’
Higher throughputs and greater energy efficiency will be two big themes in blow molding at next month’s K 2010 show.
K 2007 Blow Molding: Electric Machines Take Hold
Development of all-electric and hybrid-electric blow molding machines may be gaining momentum, as evidenced by several new models introduced in Dusseldorf.