YUDO USA Inc.
33875 Capitol St.
Livonia, MI 48150 US
734-744-8120
yudo.com
About YUDO USA Inc.
YUDO is a global company specializing in hot runner systems that produce environmentally friendly products with reduced waste of resin. Our hot runner systems have been applied in various industries to improve technology and quality, and to make products more beautiful, convenient, and safe.
IS THIS YOUR COMPANY?
As Seen On Plastics Technology
YUDO USA Inc. Supplies the Following Products
- Hot Runner Components
- Injection Molding Nozzles
- Temperature Controllers, Monitors
Editorial, News, and Products
-
Injection Molder Bases Company Culture on Employee Empowerment
After more than two decades in the industry, Rodney Davenport was given the opportunity to create an injection molding operation in his own vision, and — in keeping with the product he was making — to do so from the ground up.
-
Heat-Activated Purging Concentrate Cuts Molder's Scrap & Changeover Times
CH3 Solutions increased productivity on its multi-cavity hot runners with new Asaclean Plus Grade concentrate.
-
K 2019 Report: More Control, Faster Ordering for Molds, Hot Runners
Online monitoring of existing systems and configuration and ordering of new molds were featured at K 2019, as were numerous advances in valve-gate controls.
-
NPE2018: Robots & Automation Tackle Increasing Complexity
Exhibitors highlighted brute strength, complex automation cells, wireless networking, new controls features, and “collaborative” applications. Automated one-minute mold change was another attraction.
-
Tooling at NPE: Valve Gates & Multi-Tips Top the News
There’s no letup in development of sophisticated hot-runner nozzles and controls. Here’s news in these and other tooling products at the show.
-
INJECTION MOLDING AT NPE: Molding Exhibits Show Off Cell Integration with Multiple Processes & Operations
If you’re interested in lightweight composites, IML, LSR, multi-shot, inmold assembly, barrier coinjection, micromolding, variotherm molding, foams, energy-saving presses, robots, hot runners, and tooling—they’re all here in force.
-
News in Hot Runners & Tooling at K 2013
Molds that break speed records for specific applications; hot runners for medical, packaging, and automotive parts; temperature and valve-gate controllers; and standardized mold components constitute a large grab-bag of news in the tooling category for injection molding at the Dusseldorf show.
-
Injection Molding at K 2013: Doing More with Less
More productivity with less energy consumption and capital investment; more operations in the machine or manufacturing cell with less time, labor, energy, and capital—these were the common themes of injection molding exhibits at October’s K 2013 show.
-
Robots at NPE2012: Faster, Stronger, Smarter
Among the many attractions in injection molding exhibits at NPE2012 were more intelligent robots with higher speeds and payload capacities
-
TOOLING AT NPE: Hot Runners & Coinjection Grab Spotlight
Tooling innovations at NPE focused primarily on multi-cavity closure and medical applications, though there was also a substantial emphasis on large automotive and appliance parts.
-
Auxiliaries at NPE: News in Materials Handling, Cooling, Granulating, Welding, Testing, Decorating
Auxiliary equipment takes in a broad range of functions, from materials preparation to post-mold finishing.
-
Injection Molding at NPE 2003
Show goers will see an electric injection machine in nearly every press maker’s booth this year, and electric/hydraulic hybrids in several.
-
Hot Runners for Large & Small Parts Debut at NPE 2009
Although we previewed a number of new developments in hot-runners at NPE 2009 in our May and June issues, the big show in Chicago served up still more new offerings for PET preforms, medical parts, caps and closures, and more.
-
NPE News in Injection Molding
If a better machine can help your company beat challenging economic conditions, you’ll probably find it at NPE. And finding it will be easier, thanks to our editors’ efforts to sift out of some 2000 exhibits the most significant news in injection and blow molding, extrusion, compounding, and thermoforming.
-
NPE 2009 News Flash
Injection MoldingHybrid Press Has Electric ClampNew injection presses that combine servo-electric and hydraulic movements to achieve high performance with energy efficiency will be discussed by Arburg Inc., Newington, Conn.
-
Modular ‘Adaptable Automation’ Makes IML More Economical
Five years ago, in-mold labeling was just gaining traction among North American injection molders as a one-step approach to decorating without secondary operations.
-
NPE 2006 News Wrap-Up: Hot Shots: New Nozzles and Controls Add Sizzle to Runnerless Molding
Electrically driven valve pins, a low-cost alternative to valve-gating, mold-mounted temperature controllers, and new components for fast color changes are some of a host of new components and systems unveiled at the giant NPE 2006 show in Chicago this past June. (Some brand-new introductions since the show are also included in this report.) The news includes runnerless products aimed at everything from micromolding to shot weights up to 17.4 lb.
-
NPE 2006 News Wrap-Up: Testing and QC--New Lab Instruments Stress Affordability and Convenience
Thermal and mechanical testers, color and appearance sensors, vision inspection devices and CMMs—the NPE had them all in more compact, economical, and easy-to-use models.
-
What to See at NPE 2006: Injection Molding
Energy-saving all-electric machines will continue to be a big draw at NPE, where new designs or upgraded models will be found in virtually every press maker’s booth.