Yizumi HPM
3424 State Route 309
Iberia
,
OH
44833
US
Connect
- Visit Company Website
- 740-382-5600
- Contact
As Seen In Plastics Technology
Injection Molding: Upper Range of High-Speed Packaging Presses Extended
Yizumi-HPM has expanded its PAC-K series of injection molding machines, adding a fourth model with 610 tons of clamping force.
Injection Molding: New Series Features Wider Platens
Yizumi-HPM’s new DP-N-WP wide-platen Series of two-platen servo hydraulic injection molding machines provide greater tie bar spacing and longer clamp strokes to support bigger mold heights and weights.
Yizumi-HPM Introduces Molding Auxiliaries
Yizumi-HPM will be able to supply complete molding cells.
Injection Molding: Three New Machine Lines and a Debut in Robots
Yizumi-HPM debuts new all-electric, servohydraulic and two-platen lines, as well as a series of Cartesian robots.
NPE Wrap-Up: News in Primary Machinery, Part 1
Rounding up details from the Big Show not previously reported in all our other coverage, here’s more news in injection and blow molding, extrusion and compounding. Next month, we’ll conclude with recycling/scrap reclaim, robots, tooling, auxiliary equipment, materials and additives.
Yizumi-HPM Expands—Again
Second expansion in less than a year at Iberia, Ohio.
NPE2018 New Technology Focus: Foam Fascination
A new physical foaming process and a significant enhancement of the MuCell process attract attention at the show.
Yizumi-HPM’s Bill Flickinger to Retire; Company Plans Tech Center Expansion
Two late-breaking news announcements from Yizumi-HPM Corp., Iberia, Ohio, include the retirement of a 50-year veteran and plans to expand its newly established U.S. technical center.
NPE2018 New Technology Focus: Healthy Interest in Medical
Medical molding is a big presence at NPE.
Yizumi-HPM: Size Plus Technical Depth
A full-service provider of injection molding technology, with the resources of one of the world’s biggest builders of injection machines and a depth of North American support.
Injection Molding at NPE2018: A Showplace for the ‘Smart Factory’
In Orlando, you’ll glimpse the future, and it’s automated and interconnected. But don’t worry, there are plenty of ways for plants of all sizes to get in on these trends.
New Foaming Technology for Thin-Wall Parts
Trexel’s new MuCell P-Series nitrogen dosing equipment enables greater lightweighting of thin-wall packaging than ever possible before.
Molding Foam with a Smooth Surface
Three lines of Yizumi HPM presses are new adapted for the U.S. market. A large, two-platen model is molding MuCell foam with a hot/cold mold process.
New Physical Foaming Process for Injection Molding
Linde will introduce a new physical foaming process for injection molding and show off CO2-based gas-assist and mold-cooling technologies.
New Tech Center Shows Off New Injection Presses
Facility features a variety of machines from Yizumi-HPM for the U.S. market.